Bush MCS-512 - Using Your Micro Hi-Fi

6
Switch on
Press and release the power
button to the left of the display
on the Micro Hi-Fi or on the
remote control.
The red power LED to the left of
the display will switch o.
Your Micro Hi-Fi will power on in
CD mode and ‘HELLO’, followed
by ‘LOAd’ and then ‘NO Cd’ will be
displayed.
Switch o
Press and release the power
button to the left of the display
on the Micro Hi-Fi or on the
remote control.
‘OFF’ will be displayed and the
red power LED to the left of the
display will switch o.
To completely power o the
Micro Hi-Fi, switch o the mains
power at the wall socket.
Change the mode
Press and release the ‘Mode’
button on front of the Micro
Hi-Fi or on the remote control
to change modes. CD/FM
Radio/Line in and Bluetooth
are available. Please check the
display, which will conrm the
mode.
Adjusting the volume
Turn the rotary volume control
on the front of the Micro Hi-Fi,
anti-clockwise to decrease the
volume and clockwise to increase
the volume.
You can also use the ‘Vol-’ or ‘Vol+’
buttons on the remote control to
decrease or increase the volume.
When you adjust the volume,
please check the display which
will conrm the volume setting.
Mute
Press and release the ‘Mute’
button on the remote control to
turn the sound o.
Press and release the ‘Mute’
button to turn the sound on
again.
Note: The mute function will
cancelled automatically if you
use the rotary volume control on
the Micro Hi-Fi or press the ‘Vol+’
or ‘Vol-’ buttons on the remote
control.
Using your Micro Hi-Fi