16
Bluetooth mode
Bluetooth (BT) mode
Check that your Micro Hi-Fi is in
Bluetooth mode. If you are not
already in BT mode, briey press
and release the ‘Mode’ button on
the front of the Micro Hi-Fi or on
the remote control, until you are
in BT mode (check the display).
‘bLUE-t’ will be displayed and a
blue LED will ash if a device has
not been ‘paired’ or connected
with your Hi-Fi.
Connecting or ‘Pairing’ with
your Hi-Fi
In Bluetooth (BT) Mode:
1. ‘bLUE-t’ will ash in the display.
2. On the device that you would
like to connect to your Micro Hi-Fi
via Bluetooth (e.g. iPhone/iPad/
Android/other phone/Tablet/
Computer), turn on Bluetooth
connectivity and ensure that it is
‘discoverable’.
Note: If necessary, refer to the
instructions for your device to
add or set up Bluetooth.
3. Select to ‘Add new device’, if
necessary.
Note: Some products will
automatically search for a new
device and so the ‘Add new
device’ option is not available.
4. When found, your Hi-Fi will be
displayed as ‘BUSH Audio’. Select
the device name to begin pairing.
5. Your Hi-Fi will give an audible
‘Beep’ when it has discovered a
Bluetooth device. When pairing
is complete ‘bLUE-t’ will stop
ashing in the display and will
remain constantly on.
6. Now that you have paired
your device with the Bluetooth
speaker, it will connect to it when
it is within range, which is about
10 metres or less (33 feet or less),
line of sight.
7. Your device will remain paired
with the Hi-Fi unless you decide
to disconnect or ‘unpair’ it.
Note: If your device should be
come unpaired for any reason,
follow the steps above to ‘pair’ it
again.
Listening to Music/Audio using
Bluetooth
In Bluetooth mode:
1. Select and start the music or
audio that you wish to listen to
on your paired Bluetooth device,
it will now be heard through the
Micro Hi-Fi speakers. Adjust the
volume on the connected device
and/or your Hi-Fi.
To Next Page
Loading...
