Bush MCS-512 - Equalizer; Adjust the Bass Setting; Adjust the Treble Setting; Loudness

7
Equalizer or EQ setting
You can change the sound of
your Micro Hi-Fi, using the EQ
setting, there are 4 options and
EQ o available (Rock, Classic,
Pop, Jazz and O).
Press and release the ‘EQ’ button
on the remote control to display
and change the EQ setting.
Adjust the bass setting
Use the ‘Bass +’ or ‘Bass -’ buttons
on the remote control to adjust
the bass setting. When you
adjust the bass, please check the
display, which will conrm the
setting.
Press and release the ‘Reset’
button on the remote control
to reset the Micro Hi-Fi Bass and
Treble settings.
Adjust the treble setting
Use the ‘Treble +’ or ‘Treble -’
buttons on the remote control to
adjust the treble setting. When
you adjust the treble, please
check the display, which will
conrm the setting.
Press and release the ‘Reset’
button on the remote control
to reset the Micro Hi-Fi Bass and
Treble settings.
Loudness
Press and release the ‘Loudness’
button on the remote control to
enhance the bass level.
Press and release the ‘Loudness’
button again to turn the
loudness function o.
Using headphones
You can connect headphones
with a 3.5mm plug (not included)
to your Micro Hi-Fi. The
headphone socket can be found
on the front of the Micro Hi-Fi of
the left hand side.
When you have headphones
connected the Micro Hi-Fi
speakers are switched o and all
sound is via the headphones.
Note: Always keep the volume
within reasonable limits.