15
Store an FM station preset
When you search for stations on
your Micro Hi-Fi (see Tuning to
an FM station on page 14), your
Micro Hi-Fi will automatically
store each station found into its
preset memories. A total of 40
preset locations are available.
You can manually store an
FM radio station into a preset
memory location.
1. Tune the Hi-Fi to the radio
station that you wish to preset
2. Press and release the ‘Memory’
button on the remote control.
3. Using the numeric keypad on
the remote control, enter the
number of the preset location
that you would like to store the
station to.
4. Press and release the button
on the remote control to conrm.
Your radio station will now be
stored to that preset location.
Tune to an FM station preset
In FM radio mode:
1. Briey press and release the
‘Preset’ button on the remote
control twice. ‘CH--’ is displayed.
2. Use the numeric keypad on
the remote control to enter the
preset location that you would
like to go to, e.g. 02.
The Micro Hi-Fi will tune to that
preset location and station and
begin to play.
Note: Alternatively, you can
repeatedly press and release the
‘Station +’ or ‘Station -’ button
on the remote control to move
quickly through the preset
locations. When the radio station
frequency that you would like
to listen to displayed, wait a few
seconds and your Micro Hi-Fi will
tune to that station and begin to
play.
To Next Page
Loading...
