Bush MCS-512 - Unresponsive Controls; CD Playback Errors

19
Problem Solution
The function buttons
do not respond:
- Check that mains power wall socket is
switched on and that the Micro Hi-Fi is not
in standby mode.
- Check that you are trying to use the
function buttons for the mode that you
are in.
- If you are using mains power, unplug the
mains power. Leave the Micro Hi-Fi for 3
minutes and then reconnect the power.
CD does not play: - Check that you are in CD mode. If you are
not already in CD mode, briey press and
release the ‘Mode’ button on the front of
the Micro Hi-Fi or on the remote control,
until you are in CD mode (check the
display).
- Check that the CD in the CD tray is the
right way up (label side up).
- Take out the CD and check that it is not
marked or scratched. Damaged CDs
cannot be played in the Hi-Fi or may skip
or not rotate correctly.
- Please check that you are using an original
audio CD and not a copy. Often copied
CDs will not play.