31
Using your DAB/FM Digital Radio
Let’s get started
Using your DAB/FM Digital Radio
SETING THE DISPLAY ACKLIGHT LEVEL
(in operational mode only)
The light level for the display can be selected in operational modes
(high, medium, low or off).
1. With the radio in operational mode, press the MENU button and the
press the TUNNING (
◄
) or (
►
) buttons until ‘System’ is displayed.
Press the SELECT button to accept.
2. Use the TUNNING (
◄
) or (
►
) buttons until ‘Backlight’ is shown in
the display and press the SELECT button to accept.
3. Use the TUNNING (
◄
) or (
►
) buttons until the backlight level of
choice is displayed and then press the SELECT to confirm.
Note
• Pressing any button on the unit will switch the backlight to the
highest setting for five seconds.
CARE AND MAINTENANCE
• Wipe external surfaces with a soft cloth. If the cabinet is very dirty,
unplug from the mains supply and use a damp cloth soaked in
a weak solution of washing up liquid and water. Allow it to dry
thoroughly before reusing.
To Next Page
Loading...
