Using your Stereo FM Radio20
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Tro ubles hooting
Using your Stereo FM Radio
Let’s get started
Power on
1. Short press the Power button to switch on your Radio. An FM radio frequency, such as
87.5 will be displayed.
Adjusting the volume
• Turn clockwise to increase the volume.
• Turn anti-clockwise to decrease the volume.
Dim the display
1. Repeatedly short press the Dimmer button to change the brightness of the display,
there are four options available.
Power o (Standby)
1. Short press the Power button to switch off your Radio. The clock will be displayed
when using mains power (Standby mode).
Note: When using batteries to power your radio, the clock will not be displayed, to
conserve battery power.
FM Radio
Please make sure that the telescopic aerial is fully extended before you attempt to tune
to an FM station (a vertical position is recommended). This will ensure that the maximum
signal strength is available when the radio begins to scan. Extending the aerial also ensures
the best possible sound quality.
To Next Page
Loading...
