Getting to know your Stereo FM Radio
16
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Tro ubles hooting
Getting to know your Stereo FM Radio
You’ll be up and running in no time
Connection
1. Connect the mains power lead into the socket on the back of the Radio.
2. Plug the power adaptor into the mains power wall socket and switch on. The Radio
display will turn on and 0:00 will be displayed.
Inserting batteries (optional)
1. Before installing the batteries (not included) please ensure that the Radio is switched
off using the Power switch and has been unplugged from the mains power supply.
2. On the back of the Radio, press in the tab on the battery compartment cover to
remove it.
3. Insert 4 x 1.5V AA-size (also known as LR-6) batteries, making sure to note the ‘+’ and
‘-‘ markings and position the battery the correct way around.
4. Replace the battery cover, making sure that it ‘clicks’ shut.
Note: For battery operation please ensure that the mains power is switched off and
remove the mains power plug from the socket on the back of the radio.
Set the time
1. Long press the Time set button, the hour will flash in the display.
2. Use the left hand rotary tune control to set the correct hour and Short press the Time
set button.
3. The minutes will flash. Use the left hand rotary tune control to set the correct minutes
and Short press the Time set button.
4. The clock time is now set.
Note: 24 hour time is used for the clock display.
To Next Page
Loading...
