Bushnell GOLF WINGMAN2 - Product Components and Controls; Remote Battery Replacement

3
Click to Return to the Table of Contents
INTRODUCTION
Congratulations on purchasing the Bushnell® Wingman 2 Bluetooth® Speaker with Audible GPS. The Wingman 2 is a
rugged, high-quality wireless speaker designed to entertain the avid golfer while keeping them informed on the course
when linked with the Bushnell Golf Mobile App. This owner’s guide will help you achieve optimum satisfaction with the
product by explaining its features and operation and how to care for it. Please read these instructions before using your
Wingman 2 to ensure the best performance and longevity.
5
4
3
2
1
The back of the Remote Control has a BITE
magnet to afx to the speaker or cart bar.
* remote replacement part# 362420
7
6
PARTS GUIDE
1. Remote Control with BITE Magnet
2. Power Button
3. Volume Up
4. Play
5. Volume Down
6. Bushnell® Button
7. BITE Magnet
8. Charge Out USB-A
9. Charge In USB-C
10. Reset Button
11. USB Charging Cable
11
8
9
10
REMOTE BATTERY REPLACEMENT
1. Unscrew the small screw on the side of the remote. (Fig. A)
2. Locate the Open/Close indicator on the back of the remote. Twist Left to Open. (Fig. B)
3. Replace CR2032 3V Battery. (Fig. C)
4. Put the remote back together by aligning the notches on the top and bottom pieces and
twist Right to Close. Tighten the screw to finish.
Fig. A Fig. B
Fig. C