18
6 Firmware Upgrades
The manufacturer reserves the right to upgrade the camera
and the firmware. Users can upgrades firmware through SD card
(SD card capacity less than 32GB)
Follow the steps below to implement the upgrades:
1) Ready a SD cart and format the SD card;
2) Copy the “FWD3A.bin” file into root directory of the SD
card;
3) Insert SD card to camera, while press “OK” button switch
camera to “TEST” mode, after red light flashes loosen the
“OK” button.
4) Upgrading is underway when red indicator light flashes
continually and TFT screen is off. Keep power on until TFT
screen turn on and upgrade process finish (upgrade process
needs 1minute).
5) Restart and check if the new version number is the same as
the old one, to confirm upgrade process succeed.
Perform the upgrade step again if failure.
To Next Page
Loading...