EasyManua.ls Logo

Butterfly Amicus 3000 Plus - Ball Place Button; Ball Place Mode Examples

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ball "Place" button
The ball place button can select three different ball positioning modes:
Pr. (Program), Separ. (Separate), and Rnd (Random), indicated by the 3 yellows lights on the control
panel.
24. In Program mode - "Pr." light is on - Ball A is sent to left-right position A, Ball B is sent to
L-R position B, Ball C is sent to L-R position C, and Ball D is sent to L-R position D. [These
four Left-Right positions are determined by the four horizontal levers on the right side of the
control panel]
25. In Separate mode - "Separ." light is on - the 1st ball of a given pattern is sent to the L-R
position A, the 2nd ball to the L-R position B, 3rd to C, and 4th to D, repeating with the 5th
ball to L-R position A, etc.
26. In Random mode - "Rnd." light is on - the Amicus will randomly deliver balls, selecting from
the L-R positions you have chosen.
Ball "Place" mode examples
An example of the 'Program Mode' was used at the beginning of this chapter ... if you remember - Ball A
(two balls) was sent to position A, and Ball B (three balls) was sent to position B. Lets now move on to
examples of the 'Separate Mode' and 'Random Mode'.
Separate Mode example: Using the same setup as before ...ball A (two balls) and ball B (three balls), try
this ... select the 'Separate Mode' by pressing the 'Place button', (the yellow light below "Separ" should
now be on). Then press the remote on/off button to play the pattern. You should notice that the:
27. 1st ball (A) is sent to position A
28. the 2nd ball (A) is sent to position B
29. the 3rd ball (B) is sent to position A
30. the 4th ball (B) is sent to position B
31. and the 5th ball (B) is sent to position A
In the above example, balls are delivered to two separate L-R positions. To select additional positions -
use the up and down arrow keys, as you do this a yellow light will turn on next to the position(s) you have
selected. Balls would then be sent in this order:
32. 1st Ball - Position A
33. 2nd Ball - Position B
34. 3rd Ball - Position C
35. 4th Ball - Position D
36. 5th Ball - Position A

Related product manuals