EasyManua.ls Logo

BW Technologies GasAlertMicroClip - Page 17

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GasAlertMicroClip
Specifications
15
O
2
measuring principle: Capillary controlled concentration
sensor
Alarm conditions: TWA alarm, STEL alarm, low alarm, high
alarm, multi-gas alarm, over range (OL) alarm, low battery
alarm, confidence beep, automatic shutdown alarm
Audible alarm: 95 dB+ at 30 cm (100 dB typical) variable
pulsed beeper
Visual alarm: Red light-emitting diodes (LED)
Display: Alphanumeric liquid crystal display (LCD)
Backlight: Activates when the pushbutton is pressed and
deactivates after 5 seconds. Also activates during an alarm
condition.
Self-test: Initiated at activation
Calibration: Automatic zero and automatic span
Oxygen sensor: Automatic span on activation (selectable)
User field options: Confidence beep, latching alarms,
enable/disable safe display mode, oxygen measurement,
combustible sensor measurement, sensor disable, set
calibration interval, force calibration, calibration lock, force
bump, bump interval, bump due lock, stealth mode, IR stealth
mode, language selection, enable/disable automatic oxygen
calibration, enable/disable auto zero at start-up, set alarm
setpoints, set span concentration values, and set STEL
calculation period.
Battery operating time:
1 rechargeable lithium polymer: 10-12 hours (typical)
Year of manufacture: The detector’s year of manufacture is
determined from the serial number. The second and third
number after the first letter determines the year of manufacture.
E.g., H3
04-Y000001 = 2004 year of manufacture
Approved batteries:
North America
Approved batteries for product (standards EN50020, UL913,
C22.2 No. 157)
Rechargeable battery Temperature code
Lithium polymer T4
Battery charger: GasAlertMicroClip charging adapter
First-time charge: 2-3 hours
Normal charge: 2-3 hours
Warranty: 2 years including sensors
Approvals:
Approved by CSA to both U.S. and Canadian Standards
CAN/CSA C22.2 No. 157 and C22.2 152
ANS/UL – 913 and ANSI/ISA – S12.13 Part 1
CSA Class I, Division 1, Group A, B, C, and D
ATEX CE 0539 g II 1 G EEx ia IIC T4
KEMA 06ATEX0056
IECEx Ex ia IIC T4

Related product manuals