BW Technologies GasAlertMicroClip - Introduction; Safety Information - Read First

1
GasAlertMicroClip
Introduction
This quick reference guide provides basic information for the
GasAlertMicroClip. Refer to the user manual on the
accompanying CD-ROM for complete operating instructions.
The GasAlertMicroClip gas detector (“the detector”) warns of
hazardous gas at levels above user-selectable alarm setpoints.
The detector is a personal safety device. It is your responsibility
to respond properly to the alarm.
Note
The detector is shipped with English as the default displayed
language. Additional languages provided are Portuguese,
Spanish, German, and French. The screens for the additional
languages are displayed on the detector and in the
corresponding Quick Reference Guide.
Safety Information - Read First
Use the detector only as specified in this guide, otherwise
the protection provided by the detector may be impaired.
Read the following Cautions before using the detector.
a Cautions
⇒ Warning: Substitution of components may impair
Intrinsic Safety.
⇒ Caution: For safety reasons, this equipment
must be operated and serviced by qualified
personnel only. Read and understand the user
manual completely before operating or servicing.
⇒ Charge the detector before first-time use. BW
recommends the detector be charged after every
workday.
⇒ Calibrate the detector before first-time use and
then on a regular schedule, depending on use
and sensor exposure to poisons and
contaminants. BW recommends at least once