33
10. Warranty
In the case of a fault during the warranty period, ple-
ase contact your contract partner, the installation
company with details about the unit type and pro
-
duction number (see technical data or rating plate
on unit). The current national legal warranty condi
-
tions apply.
Operator obligations
You have purchased a durable and servicefriendly
product. Nevertheless, every technical system re-
quires regular servicing and maintenance to ensure
correct functionality. A pre-requisite for functionality
and the warranty is to comply with the specifica
-
tions set out in these operating instructions. .
This concerns, in particular:
– The intended use of the AQA total units
– Operation within application limits
–
Correct installation by an authorised specialist firm
– Implementation of regular inspections
– Implementation of service and maintenance
works by your installation company or our
service engineers (specialist experts) during
every refill replacement.
All servicing and maintenance work, and the repla
-
cement of wear or spare parts, must be carried out
by trained personnel only (unit installation company
or our works customer ser-vices). Only original BWT
spare and wear parts may be used! We recommend
that you agree a maintenance contract with your in
-
staller or with BWT customer services.
Qualified staff:
The product may only be installed, commissioned
and serviced by skilled personnel. Only trained per
-
sons are allowed to operate and use it.
Trained person:
Has received instruction and studied the information
in this document concerning the tasks entrusted to
him/her, and the possible risks in the event of inap
-
propriate behaviour.
Skilled personnel:
Based on the professional training received, know
-
ledge and experience, and knowledge of the rele-
vant definitions, is qualified to install the product, to
commission and to service it.
To Next Page
Loading...
Need help?
General
