Need help?Do you have a question about the BWT SP601 and is the answer not in the manual?
Details the function of AUTO, PUMP, HEAT, and AIR status LEDs on the control panel.
Explains how to view the spa shell's current water temperature measured by the sensor.
Allows users to select desired water temperature between 10.0°C and 41.5°C in 0.5°C increments.
When water temperature falls below setpoint, the pump and heater activate simultaneously.
Guides users through cycling pump modes: Low speed, High speed, Off, and Automatic.
Explains cycling through light colours, modes, and turning it off.
Explains how to set the filtration cycle duration using specific key presses.
Covers starting the blower, speed regulation, oscillation mode, and stopping the blower.
Guides on adjusting blower speed via arrow keys in the speed regulation mode.
Signals water absence in heater; covers causes, checks, and resolution.
Indicates a stuck control pad key or prolonged press; lists potential causes.
Problem with heater water sensor: disconnected, damaged, or faulty.
Indicates water temperature exceeds 45°C; discusses causes and sensor checks.
Heater overheating safety tripped; explains causes like air pockets or pump issues.
Indicates a relay stuck issue; advises contacting sales agent for assistance.
Indicates a problem with the spa shell water temperature sensor.
Details the function of AUTO, PUMP, HEAT, and AIR status LEDs on the control panel.
Explains how to view the spa shell's current water temperature measured by the sensor.
Allows users to select desired water temperature between 10.0°C and 41.5°C in 0.5°C increments.
When water temperature falls below setpoint, the pump and heater activate simultaneously.
Guides users through cycling pump modes: Low speed, High speed, Off, and Automatic.
Explains cycling through light colours, modes, and turning it off.
Explains how to set the filtration cycle duration using specific key presses.
Covers starting the blower, speed regulation, oscillation mode, and stopping the blower.
Guides on adjusting blower speed via arrow keys in the speed regulation mode.
Signals water absence in heater; covers causes, checks, and resolution.
Indicates a stuck control pad key or prolonged press; lists potential causes.
Problem with heater water sensor: disconnected, damaged, or faulty.
Indicates water temperature exceeds 45°C; discusses causes and sensor checks.
Heater overheating safety tripped; explains causes like air pockets or pump issues.
Indicates a relay stuck issue; advises contacting sales agent for assistance.
Indicates a problem with the spa shell water temperature sensor.
General| Brand | BWT |
|---|---|
| Model | SP601 |
| Category | Control Panel |
| Language | English |
To Next Page