BYD BYD5030XYZBEV1 - Tyre Sealant Application Steps

234
8-1 When Failure Occurs
2. Take out the inflator hose and power
plug of the inflator pump.
3. Twist off the sealant bottle cap and the
cap at the interface between the inflator
pump and the sealant bottle.
WARM TIP
 To prevent the sealant from splashing, do not tear off the foil from the sealant bottle.
4. Screw the sealant bottle opening
clockwise onto the bottle holder of the
inflator pump until it is tightened.