F6 OWNER’S MANUAL
162
2．Press the reed, pull out the connecter of
electric device.
3．Pull out the sealing cover of high beam.
4．Contrarotate the mount of small light for
quarter circle. Take out the small light.
5．Take out and replace the bulb of small
light.
6．Rotate small light clockwise, and make it
reach to proper position.
7．Close the sealing cover.
8．Connect the connecter of electric device,
make sure it is well connected.
9．(Driver side)
Install the battery.
10．Open the headlight to test the new bulb.
To Next Page
