F6 OWNER’S MANUAL
163
Front turning light
1．Pull out the key from the ignition switch,
open the engine hood.
2．Press the reed and pull out the connecter
of electric device.
3．Contrarotate the mount for quarter circle,
and disassemble it from headlight
assembly．
4．Pull out the bulb from the mount directly.
5．Fix the bulb into the mount until it
reaches to bottom of mount.
6．Fix the mount back to headlight assembly.
Rotate it clockwise and make it locked to
the proper position.
7．Test the light to make sure whether the
new bulb works normally.
To Next Page
Loading...
