BYD MINI ES - 3 Technical Description; Scope of Supply; Nameplate Introduction

18
NOTICE!
· Do not directly install the device at severe weather condition.
· Do not use the device for medical equipment.
· If equipment is deformed, broken or appears abnormal sounds or smell, please
contact with the authorized service provider immediately.
· If equipment is faulty or do not operate normally, please contact with the
authorized service provider right away.
· Keep minimum space for inspection and service.
· Please contact with BYD authorized provider if regular maintenance is needed.
· Please keep the system fully charged if prepare to leave the device unused for a
long time,.
· Please contact with BYD authorized service provider when the device needs to
be relocated.
· This equipment is allowed to be installed indoors only, please do not install
outdoors.
· This product is allowed to be used in Australian area. If there are any other
special requirements, please contact with the manufacturer for prior approval.
3. Technical Description
3.1 Scope of supply
After unpacking the storage system, you must check the scope of delivery. If
components are missing or damaged, contact with the manufacturer right away. The
following components are included as standard in the scope of delivery:
Number
Item
Quantity
1
MINI ES
1
2
CT
2
3
User Manual
1
4
Factory Inspection Report
1
5
Certificate of Qualification
1
6
DRED
1
3.2 Nameplate introduction
The Mini ES is fitted with a nameplate on its front left housing. This nameplate is
engraved with important parameters related to the system. Please protect it carefully in the
process of transportation, installation, maintenance and overhaul. Do not damage or
remove the nameplate.