Byron BY101 - User Manual

1: Place a small flat screwdriver
into the locking clip on the
base of the Bell Push.
2: Gently twist.
3: The backing plate will unclip.
1
1: Push Button 5: Portable Chime
2: Melody Selector 6: Speaker
3: Bell Push Battery
4: Signal Sent LED
BY101
1:
2:
4:
:3
6:
5:
Functions:
3
1: Remove the battery cover of
the Door Chime.
2: Insert 3 X 1.5V Size ‘AA’
batteries (Not Supplied).
3: Make sure the
Positive/Negative terminals
match the internal markings.
3 x 1.5V ‘AA’
1: The Chime will ‘Beep Beep’.
2: Press the Bell Push within
60 seconds to learn the
Bell Push to the chime.
3: The Chime Will Ring to
confirm setup.
4: Replace the battery cover.
Note: Maximum of 2 Bell
Pushes can be learnt to a
single Chime for Front/Back
Door use.
4
Beep
Beep
To select a melody for the Door Chime
1: Remove the Back Plate from the Bell
Push
2: Press the Melody Select button.
3:The chime will play the newly selected
sound
4: Press again to select the next melody.
Note: For Front/Back door setup, select a
different melody in one of the Bell Pushes.
4 Selectable Melodies
1: Ding Dong (Repeat) 3: Alarm
2: Westminster 4: Ding Dong Ding
CR2032
™
Portable
Wire Free Chime Kit
New Chime
Adding Additional Chime/Bell Push:
Additional Chime
To add an additional Chime unit to the Door Chime kit
1: Remove the batteries on your NEW Door Chime and wait
for 10 seconds.
2: Replace the batteries, making sure the Positive/Negative
terminals match the internal markings.
3: The Chime will ‘Beep Beep’ to indicate that it has entered
the Learn mode.
4: Press the Bell Push within 60 seconds, to pair the additional
Chime to the Bell Push.
5: Chime will ring to confirm setup, wait 60 seconds for the Chime
to exit the learn mode before repressing the Bell Push.
Additional Bell Push
To add an additional Bell Push to the Door Chime kit
1: Remove the batteries on your Door Chime and
wait for 10 seconds.
2: Replace the batteries, making sure the
Positive/Negative terminals match the
internal markings.
3: The Chime will ‘Beep Beep’ to indicate that it has
entered the Learn mode.
4: Press the both Bell Push within 60 seconds, to pair the additional
Bell Push to the Chime.
5: Chime will ring to confirm setup, wait 60 seconds for Chime to exit
the learn mode before repressing the Bell Push. For Front/Back
door setup, select a different melody in one of the Bell Pushes -
See Melody Selection.
Note: Maximum of 2 Bell Pushes can be learnt to a single
Door Chime.
Beep
Beep
Front Door
Back Door
1: Insert CR2032 battery
(Supplied) into the battery
holder.
2: Make sure the positive side
is facing upwards.
3: Replace back plate.
2
Warning: Make sure that the batteries are
replaced correctly to avoid battery failure.
Only replace with same or equivalent type.

Summary

Setup and Core Functions

Bell Push Opening and Battery Insertion

Steps to open the Bell Push using a screwdriver and insert the CR2032 battery.

Chime Unit Battery Installation

Instructions for inserting AA batteries into the Door Chime unit, ensuring correct polarity.

Melody Selection for Door Chime

Guide to selecting one of the four available melodies for the Door Chime.

Pairing an Additional Chime Unit

Procedure to connect a new chime unit to the existing bell push and chime.

Pairing an Additional Bell Push

Procedure to connect an additional bell push to the existing chime unit.

Installation and Maintenance

Bell Push Mounting

Instructions for mounting the Bell Push using screws or adhesive, ensuring correct orientation.

Chime Placement and Range

Advice on placing the Door Chime for optimal operating range, avoiding metallic surfaces.

Bell Push Battery Change

Steps to replace the CR2032 battery in the Bell Push.

Chime Unit Battery Change

Steps to replace AA batteries in the Door Chime unit.

User Hints and Common Issues

Tips for diagnosing and resolving common problems with the chime kit.

Technical Details and Ratings

Overview of product specifications, including IP rating, power, and range.

Byron BY101 Specifications

General

Brand	Byron
Model	BY101
Category	Accessories
Language	English