EasyManuals Logo

C-SCOPE CXL4 User Manual

C-SCOPE CXL4
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
NOTE The Locator records every Automatic Daily Self Test. The Test results can be retrieved from
the Locator to produce a Product Validation Certificate by using the PC Toolkit (see page 57).
12
Using the Locator: Automatic Daily Self Test
NOTE When turning the Locator on for the first time it is important that no other Locator is situated within 30cm (1’)
and that no Signal Generators, Transmitters or Sondes are operating within 5m (16’) .
NOTE Try not to switch the Locator on for the first time in an area with unusually high Power signals such as next to
an electricity transformer.
The CXL4, DXL4 and MXL4 Locators have an in-built automatic Daily Self Test function.
This tests the Locator’s circuits and receiving aerials for correct performance.
The Self Test is automatically performed the first time the Locator is switched on each day
and takes approximately four seconds.
The Self Test process is indicated by ‘TEST’ appearing on the display.
In the top left hand corner of the screen a countdown timer shows the progress
of the test.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the C-SCOPE CXL4 and is the answer not in the manual?

C-SCOPE CXL4 Specifications

General IconGeneral
BrandC-SCOPE
ModelCXL4
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals