C-SCOPE CXL4 - SGA4 Signal Generator; SGV4 Signal Generator

SGA4 and SGV4 Signal Generator
4
SGA4 Signal Generator
The SGA4 Signal Generator is designed for use
with the CXL4 and DXL4 Locators.
• High (One Watt) and low Power Output settings.
• Pulsed or Continuous output signal.
• Loud or Muted audible output.
SGV4 Signal Generator
The SGV4 Signal Generator is designed for use
with the CXL4 and DXL4 Locators.
• Automatic Daily Self Test.
• Data Logging of all Signal Generator activity.
• Automatic Back-light.
• Four Power Output settings up to One Watt.
• Pulsed or Continuous output signal.
• Loud, Muted or Silent audible output settings.
• Combined Frequency (CF) signal output (33kHz and 131kHz)
applicable using both Connected and Induced methods
of signal transfer.