C-SCOPE CXL4 User Manual

Using the Signal Generator/Transmitter: Direct Connection to street furniture
Direct Connection to a Street Lighting Column
or other street furniture
The best method to determine the position and route
of street lighting, car park lighting cables or any other
item of street furniture with a power supply is by
using a Signal Generator/ Transmitter and the pipe
connection method.
Follow the same rules as for connecting the Signal
Generator/Transmitter to a metal pipe except attach
the red Direct Connection Lead to a metal part of
the OUTSIDE of the lamp column/ street furniture.
WARNING NEVER open the lamp column door to gain access to the cables, this is potentially dangerous
and is not necessary.
NOTE Make sure that the Direct Connection Crocodile Clip or Magnet is not insulated from the metal of the column by paint.
NOTE If the column is concrete attach the Crocodile Clip or Magnet to the metal surround of the access door.
28

C-SCOPE CXL4 Specifications

General

Brand	C-SCOPE
Model	CXL4
Category	Measuring Instruments
Language	English