C-SCOPE CXL4 - SG;T Automatic Daily Self Test; SG;T Self Test Procedure

NOTE A Self Test can be initiated manually by holding down the Pulse/Continuous button while the Signal Generator/
Transmitter is switched on.
NOTE The SGV4 and MXT4 record every Automatic Daily Self Test and any manual Self Test. The Test results can be retrieved
from the Signal Generator/Transmitter to produce a Product Validation Certificate by using the PC Toolkit (see page 58).
24
Using the Signal Generator/ Transmitter:
Automatic Daily Self Test (SGV4 and MXT4 only)
The SGV4 and MXT4 have an in-built automatic Daily Self Test function.
This tests the Signal Generator/ Transmitter circuits and transmitting aerials
for correct performance.
The Self Test is automatically performed the first time the Signal Generator/
Transmitter is switched on each day and takes approximately twelve seconds.
The Self Test process is indicated by ‘TEST’ appearing on the display.