C-SCOPE CXL4 User Manual

23
Using the Signal Generator/Transmitter: Batteries
Changing the Batteries
l Remove the Accessory Tray.
l Undo the two round knurled battery cover retaining screws situated on the underside of the Signal Generator/Transmitter.
l Remove ALL FOUR used batteries and replace with new ones.
l Be careful to insert the new batteries the correct way round in the compartment as indicated on the case.
l Replace the Battery Cover being careful to not over tighten the retaining screws.
l Replace the Accessory Tray.
WARNING Do not change batteries in confined spaces where gas may be present.
WARNING Do not mix old and new or different types of batteries.
NOTE Only use alkaline or Nickel-Metal Hydride rechargeable (NiMH) D (LR20) size batteries.
NOTE Dispose of the used batteries safely in accordance with local regulations.

C-SCOPE CXL4 Specifications

General

Brand	C-SCOPE
Model	CXL4
Category	Measuring Instruments
Language	English