Need help?Do you have a question about the C-TEC XFP501/CA and is the answer not in the manual?
General| Battery Backup | Yes |
|---|---|
| Loops | 1 |
| Enclosure Material | Steel |
| Battery Capacity | Up to 7 Ah |
| Operating Temperature Range | -5°C to +40°C |
| Standards | EN54-2, EN54-4 |
| Type | Addressable Fire Alarm Control Panel |
| Power Supply | 230V AC |
| Monitored Inputs | 2 monitored inputs |
| Mains Supply | 230V AC |
| Sounder Circuits | 2 monitored sounder circuits |
| Programmable Outputs | 3 programmable relay outputs |
| Event Log | 500 event memory |
Details how the panel indicates a fire in a single zone and related actions.
Explains panel indications and actions for fire events occurring in multiple zones.
Describes panel response to 1st-stage fire conditions, including zone dependency and delays.
Steps to start the zone investigation delay period and related user actions.
Explains panel indications and user actions for system fault conditions.
Steps to enter Access Level 2 using the panel's pushbuttons and a code.
Steps to enter Access Level 2 using the panel's keyswitch.
Procedure for silencing active alarm sounders on the panel.
Procedure for resetting the fire alarm panel after an event is cleared.
Function to enable or disable specific system zones.
Function to enable or disable specific sounder groups.
Function to enable or disable specific system outputs.
To Next Page
