CAB EOS4 - Page 19

18
19
4 Conguration
Setup tab
On the "Setup" tab all the conguration parameters can be set which are also accessible via the control panel in the
Setup menu. In addition, other parameters for the Ethernet interface or the WLAN interface can be set (see below).
Fig. 6 "Setup" tab on the printer web interface
To change a parameter:
1. Locate parameter in the tree structure.
2. Set the value of the parameter at the right end of the concerning line.
A prompt to enter user name and password appears  page 20.
3. Enter user name and password and click OK.