CAB EOS4 - Event Log

30
31
5 Test Functions
5.9 Event Log
Access only with service key inserted!
The label printer saves the following events in the Event log:
• Hardware fault
• Printhead replacement
• Firmware updates
• Resetting of the service counters
The printout occurs using the heat level and print speed specied in the Setup > Print param. menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
 Insert service key into a USB master interface.
 Insert printable medium (labels, endless paper) which extends across the entire printing width.
 If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
 Start Ofine menu.
 Select Test > Event log.
Event log
Mon Sep 26 15:41:57 2011
EOS1/300
Firmware V4.02 (Sep 26, 2011) - #170110417590
Date Description
06.05.11 14:06 Clear service counters
31.05.11 08:53 Firmware update -> V4.00 (0000)
14.07.11 14:03 Firmware update -> V4.01 (0000)
25.08.11 11:12 New printhead, 8 dots/mm, #04-007
06.09.11 14:39 New printhead, 12 dots/mm, #0X-01024
09.09.11 14:47 Clear service counters
26.09.11 14:03 Firmware update -> V4.02 (0000)
Fig. 17 Event log