42 42
9 Storage Devices
Label descriptions, graphics, fonts, and database information can be saved for the long-term on memory media.
i
Notice!
Always create a backup copy of external devices in case of a malfunction.
9.1 Suitable Storage Devices
External Devices
• USB ash drive at USB master interface.
Internal Devices
• approx. 16 MByte ash memory inside the printer (Internal Flash File System IFFS)
9.2 Installation
For external storage devices only!
1. Insert USB ash drive into an USB master interface.
2. Start Ofine menu.
3. Check if the menu Storage device is shown on the display.
If the menu Storage device is not shown, the used device is possibly not selected as Default storage
4.1.4 on page 16.
Attention!
Risk of data loss !
Do not remove the storage device while it is being accessed.
9.3 Directory Structure
On USB ash drives connected to the printer, some folders are automatically generated when uploading les to the
ash drive :
Folder name Contents
.. export.log
fonts Font les
images Graphic les
labels Label description les
misc Firmware, Setup and TMP les
Table 20 Directory structure of storage devices
To Next Page
Loading...
Need help?
General
