Caberg just speak - Page 47

46
ENGLISH
UK
AVRCP (Audio Video Remote Control Profile) protocol, enabling music to
be interrupted and restarted. If the music player with A2DP does not fea-
ture the AVRCP protocol, it may not be possible to restart music from the
CABERG JUST SPEAK system (it can still be stopped, however). In this
case, restart the music manually on the music player.
Attention: Obey all road traffic laws. Both hands should be
used to control the motorcycle when riding. All operations
on the
CABERG JUST SPEAK system should be carried
out while the motorcycle is stationary.
Connect A2DP
music player
Press and hold + button for 2 seconds (tone).
When connected, some players start music au-
tomatically.
Start music (Play)
Press the button briefl y (tone). The player
must already be connected.
Pause function
(Pause)
When the player is connected and music is
playing, press button briefl y (tone).
Next track
(Forward)
When the player is connected and playing
music, press and hold + button for about 2
seconds (tone).
Previous track
or track start
(Backward)
When the player is connected and palying
music, press and hold - button for about 2
seconds (tone).
Interrupt music and
disconnect player
Press and hold - button for 3 seconds (double
tone). The music stops and the A2DP player is
disconnected. Note: if the A2DP player is on a
cellphone, the phone connection remains active
even if the music player is disconnected.
3 FUNCTIONS