Caberg just speak - Bluetooth Music Player (A2 Dp Profile); Pairing with A2 DP Equipment; Use with A2 DP Music Players

45
ENGLISH
UK
The two CABERG JUST SPEAK will connect again automatically a few sec-
onds after they are once again within maximum radio signal range.
Note: If they are not reconnected automatically, simply press the
but-
ton briefly.
3.4 Bluetooth
®
music player (a2dp profile)
It is possible to listen to high sound quality music by connecting the CABERG
JUST SPEAK system to a music player featuring Bluetooth
®
A2DP (Advanced
Audio Distribution Profile).
3.4.1 Pairing with A2DP devices
To pair with a device featuring Bluetooth
®
A2DP, proceed as for pairing with a
cellphone (paragraph 3.2.1). When a code is requested, insert 0000 (four zeroes).
Note: Refer to music player instruction manual for more information.
Note: If a phone with Bluetooth
®
A2DP music player is already connect-
ed, it is not necessary to repeat the pairing process, as the presence of
the A2DP protocol has already been stored in memory during the phone
pairing procedure. The first time it is used, the cellphone must be con-
nected and its player switched on for the system to recognise it.
3.4.2 Operating with A2DP music player
On first use, connect the previously paired music player according to the pro-
cedure for the music player and start playing music. It will then be possible
to connect and start playing music directly from the CABERG JUST SPEAK
system (for players allowing this feature).
Warning: The CABERG JUST SPEAK system features Bluetooth
®