9032209 E1
2-7
Logical Device View
Port Icons
Port icons display the following information for each port on the device:
Port Number Label
Identifies the port on this device. Double-click this label to access the Port
Notes view.
Port Type Label
Identifies the type of port on this device. Possible types are Station (Sta) or
Ring In/Ring Out (Ring). Double-click this label to access the Token Ring
Configuration described on Page 3-11.
Port Status Label
Displays the operating status of this port. Double-click this label to access the
Port Performance view described in the SPECTRUM Views. Port status
conditions are as follows:
• ON - Green
• WRAP - Red
• BYP (Bypassed) - Yellow
Port Icon Subviews Menu Selections
Table 2-4 lists each of the port-specific Icon Subviews menu selections
available for this device. See Chapter 1, Introduction, for information on
Accessing SPECTRUM Views.
Table 2-4. Token Ring Port Menu Selections
Menu Selection Description
Port Notes Opens the Port Notes View.
Port Configuration Opens the SynOptics Token Ring Port Configuration view
described in Chapter 3, Configuration Views.
Port Performance Opens the SynOptics Token Ring Port Performance view
described in the
SPECTRUM Views.
To Next Page
Loading...