CADDX NX-6 - User Manual

SECURITY SYSTEM NOTES
Installing/Service Company _________________________________
For Service Call __________________________________________
Central Station ___________________________________________
Duress Code ____________________
FUNCTION CODES
Function Code Controls Function
This system is  is not  partitioned.
EMERGENCY ACTIVATION KEYS (check if enabled)
 Fire  Auxiliary Emergency  Police
PROGRAMMED FUNCTIONS
 Abort Delay (V)  Cancel Alarm  Forced Arming (V)
 Auto Bypass (V)  Change Partitions  Group Bypass (V)
 Auto Instant  Chime  Quick Arm (V)
 Battery Test  Communicator Test  Re Exit
 Siren Test
(V) These features should not be enabled on UL listed systems.
ENTRY / EXIT DELAY TIMES
Exit Delay Time __________ Secondary Exit Delay Time ________
Entry Delay Time _________ Secondary Entry Delay Time _______
ZONE DESCRIPTIONS
01 _________________________ 09 _________________________
02 _________________________ 10 _________________________
03 _________________________ 11 _________________________
04 _________________________ 12 _________________________
05 _________________________ 13 _________________________
06 _________________________ 14 _________________________
07 _________________________ 15 _________________________
08 _________________________ 16 _________________________
Note to installer: Identify the wireless zones on UL listed systems.

Summary

Understanding the Lights

Emergency Activation Keys

Fire

How to use the fire key for alarm activation and reporting.

Auxiliary Emergency

How to use the auxiliary emergency key for alarm activation.

Police (Panic;Hold-Up) Key

Using the police key for audible/silent alarms and reporting.

Keypad Functions

Arming Your System in the Away Mode

Steps to arm the system when the user is away from the premises.

Arming Your System in the Stay Mode

Steps to arm the system when the user is inside the premises.

Using the Quick Arm

How to use the quick arm feature for faster system arming.

Changing Modes While Your System Is Armed

Disarming Your System

Procedure for disarming the security system using a code.

Cancel; Abort Feature

Bypassing Zones

Steps to bypass specific zones on the security system.

Changing User Codes

Assigning User Code Authority Levels

Steps to assign authority levels to user codes.

Other Keypad Functions

Test Function

Reset Function

Setting the System Date

Setting the System Clock

Service Menu

CADDX NX-6 Specifications

General

Brand	CADDX
Model	NX-6
Category	Security System
Language	English