CADDX Ranger 8600 - Installation Manual

To Next Page

Main Page

Table of Contents2
General Description3
Standard Parts List3
Optional Parts List3
Parts Diagram4
Terminal Drawing and Special Notes5
Terminal Description6
Programming7
Programming Example8
#8950 Programmer8
Locations 032-047: Programming the Primary Telephone Number9
Locations 048-051: Programming the Account Code for the Primary Phone Number9
Location 052: Programming Communicator Format for the Primary Phone Number9
Location 053: Disabling the Secondary Telephone Number as a Backup9
Locations 054-069: Programming the Secondary Telephone Number (Split Reporting)10
Location 074: Programming Communicator Format for the Secondary Telephone Number10
Arm/Disarm Codes11
Phone Numbers Account Code and Format11
Optional Control and Communicator Features11
Communicator Codes11
Communicator Format Selections14
Locations 000-003: Programming the Master Arm/Disarm Code15
Locations 004-0023: Programming the Arm/Disarm Code for Users 2-615
Locations 024-027: Programming the Duress Code for User 715
Locations 028-031: Programming the "Go to Program" Access Code15
Location 075: Programming the Entry Delay Time16
Location 076: Programming the Exit Delay Time16
Location 077: Programming the Siren Shutdown/Recycle Timeout16
Locations 078-083: Programming the Zone Types16
Zone Characteristics Descriptions17
Location 086-087: Programming the Ranger 8600 for Duress Code Capability17
Location 088-089: Programming for Auxiliary 118
Location 090-091: Programming for Auxiliary 218
Location 092-093: Programming for Keypad Panic18
Location 094-095: Programming the Tamper Feature18
Location 096-097: Programming to Report Download Complete19
Location 098-099: Programming for Autotest Reports19
Location 102: Programming to Report Closings19
Location 103: Programming to Report Openings19
Location 104-105: Programming the Communicator Code for Zone 120
Locations 106-115: Programming the Communicator Code for Zones 2-620
Location 120-121: Programming to Report AC Power Loss21
Location 122-123: Programming to Report Low Battery21
Location 124: Programming for Priority Zone Type Trouble Reporting21
Location 125: Programming for Zone Bypass Reporting21
Location 127: Programming the Communicator Code for Cancel (Exception Opening)22
Location 128: Programming the Communicator to Abort22
Location 129: Programming for Silent Panic/Hold-Up22
Location 130: Enabling the Swinger Shutdown22
Location 132: Built-In Siren Driver/1 Amp Voltage Output23
Location 133: L.E.D. Extinguish Feature23
Location 134: Entering the Number of Dial Attempts23
Location 135: Power up Condition23
Location 139: Programming the Quick Arm Digit24
Location 140: Priority Siren Cutoff Inhibit24
Location 141: Double Line Extended Alarm Reporting24
Location 142: Siren/Bell Test Feature24
Location 145-148: Programming the Auxiliary Outputs25
Location 149: Inverting the Auxiliary Outputs25
Location 150: AC Power Loss Delay Feature25
Location 151: Programming the Number of Rings to Answer Download Call25
Location 152: Programming the Number of Days Left until Autotest Report26
Location 153: Programming the Current Month26
Location 155: Programming the Current Year - Tens Digit26
Location 156: Programming the Current Day of the Month - Tens Digit26
Location 160: Programming the Current Minutes - Tens Digit27
Location 161: Programming the Current Minutes - Ones Digit27
Location 162: Programming the Hour for Autotest - Tens Digit27
Location 163: Programming the Hour for Autotest - Ones Digit27
Location 166: Programming the Autotest Time Reporting Interval28
Location 168-171: Programming the Seed Code for Rotating Maintenance Codes28
Location 172: Programming User 7 or Maintenance Code Dor Opening Communicator Code28
Location 173: Programming User 7 or Maintenance Code Closing Communicator Code28
Location 174: Programming Zones 3 through 6 for Normally Closed Operation Only29
Location 175: Programming Zones 1 And/Or 2 for Normally Closed Operation Only30
Location 176: Split Reporting - Programming Tamper, Download Complete, and Autotest to Report to the Secondary Phone Number30
Location 177: Split Reporting - Programming AC Power Fail, Low Battery, Open/Close, and Maintenance Open/Close to Report to the Secondary Phone Number31
Location 178: Programming the Secondary Entry Delay (Zone Type 9)31
Location 179: Programming the Secondary Exit Delay (Zone Type 9)32
Location 180: Programming the Loop Response Time32
Locations 181-185: Do Not Program These Locations32
Locations Accessible Only through Downloading32
General Operating Instructions33
Arming and Disarming the Ranger 860033
Bypassing Zones33
Entering and Changing the Master Code (User Code #1)33
Entering and Changing an Auxiliary Code34
Removing Auxiliary Codes34
Quick Arm Feature34
Arming and Disarming with Automatic Bypass/Instant Arming34
Door Chime Annunciation35
Smoke Detector Reset35
Alarm History35
Siren/Bell Test Feature35
Keypad Operation36
Keypad Sounder36
Local Telephone Company Interface Information37
Telephone Connection Requirements37
Incidence of Harm37
Changes in Telephone Company Equipment or Facilities37
Specifications38

CADDX Ranger 8600 - Installation Manual

Table of Contents

Other manuals for CADDX Ranger 8600

Related product manuals