Variance is the difference between magnetic north and
geographic north. In some areas, the difference between
the two can be great enough to cause false compass
readings. If this happens, follow these instructions to set
the variance for your particular location:
1.
2.
3.
Find your location on the zone map. Note the zone
number.
Hold in the CAL switch (on the bottom of the mirror
housing) for.five seconds until the current zone entry
number appears in the display.
To hold in the CAL
switch, insert a paper clip into the small hole on the
bottom of the mirror housing.
Press the
CAL
switch until the number for the new
zone entry is displayed.
Once the desired zone number is displayed, stop
pressing the CAL switch and the display will show
compass direction within
a
few seconds.
Power Remote Control Mirror
located on the driver’s
door armrest.
Move the switch in the middle of the control to choose
the right or left mirror.
To
adjust the mirror, push the
arrow control in the direction you want the mirror to go.
Adjust each mirror
so
you can see the side
of
your
vehicle and the area behind your vehicle.
2-49
I
To Next Page
Loading...
