Flash-To-Pass
,
This lets you use the high-beam headlamps to signal the
driver
in
front
of
you that you-want to pass. It works
everi
if tfie headlamps are
off.
Pull the
turn
signal lever toward you to use. When
you do:
If
the headlamps are
off,
the high-beam headlamps
will
'turn
on.
They'll stay
on
as long as you hold the
lever there. Release the lever
to
turn them
off.
0
If
the headlamps are on low beam, they will
shift
to
high beam and stay there. Pull the lever toward you
to return
to
low beam.
0
If
the headlamps are on high beam, they will switch
to low beam. To return to high beam, pull the lever
toward you.
Windshield
Wipers
WIPER:
Turn the band
on
the
turn
signal lever to
control the wipers.
MIST:
Turn the band toward you and then release
it
for
a single wipe cycle.
For
more cycles, hold the band on
MIST
longer.
To Next Page
Loading...
