EasyManua.ls Logo

Cadillac 1996 Eldorado - Page 149

Cadillac 1996 Eldorado
354 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
n
Rmttn
'l'he button with the fan symbol adjusts the fan speed.
Press the up arrow to increase fan speed and the down
arrow to decrease fan speed.
mperature
Butt
The red and blue temperature buttons adjust the air
temperature coming through the system. Press the blue
button for
a
cooler setting or the red button for a warmer
setting. The outside temperature is always displayed
when your vehicle is running.
You
can change
it
from
Fahrenheit to Celsius by pressing
the
ENG/MET
(English/metric) button on the DIC.
2C
ntrols
The AUTO/ECON button automatically controls the
direction
of air delivery for air conditioning and non-air
conditioning modes.
Automatic Operation
When the system is set for AUTO, sensors will control
the air delivery mode. Air
will
come from the floor,
middle or windshield outlets. The i'an speed
will
vary
as
the system maintains the selected temperature setting.
Be careful not to put anything over the solar sensor
located
in
the middle
of
the instrument panel near the
windshield. This sensor is used by the automatic system
to regulate temperature.
To
find
your
comfort zone, start with
75°F
(24°C)
setting, allow about 20 minutes for the system to
regulate. Press the red or blue temperature buttons to
adjust the temperature if necessary. If you choose
60°F
(lb"C), the system
will
remain at that maximum cooling
setting and
will
not regulate fan speed. If you choose the
temperature of
90°F
(32"C), the system will remain at
that maximum heating setting and
will
not regulate fan
speed. Choosing either maximum setting
will
not cause
the system to heat or cool any faster.
With this setting, the air conditioning compressor
automatically cycles when needed to cool the air. In
cold weather, when the system senses the need for
heat, the airflow will
be
directed out the floor outlets.
As
the interior temperature approaches a desired setting,
the blower speed will decrease. To maintain interior
comfort. the airflow may move to the instrument panel
air outlets and floor outlets
(BI-LEVEL
mode). On
bright,
sunny
days
in
cold weather, the airflow may
come out
of
the
A/C
outlets (A/C mode) to maintain
comfort and prevent stuffiness.

Table of Contents

Related product manuals