While your vehicle is in
PARK
(P),
briefly press the
EXIT button followed by either the
1
or
2
button to
recall your programmed exit position. The exit position
may also be recalled if the vehicle is not in
PARK
(P)
by
briefly pressing the EXIT button and then pressing and
holding either the
1
or
2
button until seat movement is
complete. Releasing the buttons will stop seat
adjustment.
Automatic seat movement will occur if the Remote
Keyless Entry (RKE) transmitter is used to enter the
vehicle. The number
on
the back of the transmitter
corresponds to the
1
or
2
seat position. After the unlock
button is pressed on the
RKE
transmitter and the key is
placed in the ignition and turned on, the seat will
automatically adjust to the appropriate position.
Heated
Front
Seat
(Option)
1-4
To Next Page
Loading...
