4.
With the coolant surge tank pressure cap
oft',
start the
5.
Then replace the pressure cap. Be sure the arrows on
engine and let it run until you can feel
the
upper
the
pressure cap line up like this.
radiator hose getting hot. Watch out for the
engine fans.
By this time, the coolant level inside the coolant Driver Information Center, coolant
is
at the proper fill
surge tank may be lower.
If
the level is lower, add level.
If
a
CHECK
COOLANT
LEVEL
message does
more
of
the
proper
mix
to the coolant surge tank appear, repcat Steps
1
to
3
or see your dealer.
until the level reaches about
2.5
inches
(60
mm)
below the base
of
the filler neck.
Start the engine and allow
it
to
warm
up.
If
the
CHECK
COOLANT
LEVEL
message does not appear
on
the
To Next Page
Loading...
