3.
Just before it reaches the end, give it a quick pull.
4.
Let the belt
go
back all the way.
You
should hear a
slight clicking sound.
If
you don’t, the adjustment
feature won’t set, and you’ll have to start again.
5.
Now
you
can
add a small amount of slack. Lean
forward slightly, then sit back.
If
you’ve added more
than
1
inch
(25
mm)
of slack, pull the shoulder belt
out as you did before and start again.
If you move around in the vehicle enough, pull out the
shoulder belt, or open your door, the belt will become
tight again. If this happens, you can reset
it.
1-15