Cleaning Vinyl
Cleaning
Wood
Panels
Use warm water and a clean cloth.
0
Rub with a clean, damp cloth to remove dirt. You
may have to do it more than once.
Things like tar, asphalt and shoe polish will stain if
you don’t get them
off
quickly. Use a clean cloth and
a
GM
VinylLeather Cleaner or equivalent product.
Cleaning Leather
Use a soft cloth with lukewarm water and a mild soap or
saddle soap.
For stubborn stains, use a GM Vinylbeather Cleaner
or equivalent product.
Never
use oils, varnishes, solvent-based
or
abrasive
cleaners, furniture polish or shoe polish on leather.
Soiled leather should be cleaned immediately.
If
dirt is
allowed to work into the finish,
it
can harm the leather.
Cleaning
the
Top
of
the Instrument Panel
Use only mild soap and water to clean the top surfaces
of
the instrument panel. Sprays containing silicones or
waxes may cause annoying reflections in the windshield
and even make
it
difficult to see through the windshield
under certain conditions.
Use a clean cloth moistened in warm, soapy water (use
mild dish washing soap).
Dry
the wood immediately
with a clean cloth.
Cleaning Speaker
Covers
Vacuum around a speaker cover gently,
so
that the
speaker won’t be damaged. Some spots and stains will
clean
off
better with just water and mild soap. If
something gets
on
one of them and you need to use a
solvent, follow these steps:
Gently scrape excess soil from the trim material with
a clean, dull knife or scraper. Use very little cleaner,
light pressure and clean cloths (preferably
cheesecloth). Cleaning should start at the outside of
the stain, “feathering” toward the center. Keep
changing to a clean section
of
the cloth.
When you clean a stain from fabric, immediately
dry the area with a blow dryer to help prevent a
cleaning ring.
6-47
1
To Next Page
Loading...
