AUDIO: Press to access the full Audio screen to
change AM, FM, XM™ Satellite Radio Service
(if equipped), CD, MP3, DVD, HDD, USB, and iPod,
and auxiliary input. See “Audio” under Navigation Audio
System on page 3-2, CD Player on page 3-10, DVD
Player on page 3-16, and Hard Drive Device on
page 3-22 for more information.
NAV (Navigation): Press to view your vehicle’s current
position on the map screen. Each press of this key
cycles through Full Map and the tab that displays the
current audio source (AM, FM, CD, etc.). Full Map
displays the screen in full map view. Selecting the audio
tab splits the screen between the map screen and the
current audio source screen menu. See “Audio”
under Navigation Audio System on page 3-2 for more
information.
q MENU r SELECT: Turn the MENU knob to
highlight a feature. Press this knob to select the
highlighted feature.
REC (Record): Press to record a CD, MP3, and USB
to the hard drive. See Navigation Audio System on
page 3-2, CD Player on page 3-10, and Hard Drive
Device on page 3-22 for more information.
CONFIG (Configure): Press to adjust features for
sound, radio, navigation, the display, and clock. See
Configure Menu on page 2-26 for more information.
RPT (Navigation Repeat): Press to repeat the
last voice guidance prompt.
DEST (Destination): Press to access the Route screen
to plan a destination. If route guidance is active,
press this key to access the Route screen. See
Destination on page 2-12 for more information.
DEL (Delete): Press to delete XM categories and
information from the hard drive. See Navigation Audio
System on page 3-2 and Hard Drive Device on
page 3-22 for more information.
INFO (Information): Press for Speech Help and
Weather. See Speech Recognition on page 4-2 and
Weather on page 4-4 for more information.
k (Play/Pause): Press to play and to pause Timeshift,
CD, MP3, DVD, HDD, USB, iPod. See Navigation
Audio System on page 3-2, CD Player on page 3-10,
DVD Player on page 3-16, and Hard Drive Device
on page 3-22 for more information.
2-3