Using OnStar
®
Destination Download
Press the blue OnStar button and an Advisor can locate a
point-of-interest or an address and download the
necessary information or coordinates to your navigation
system. Once the destination is downloaded, the
navigation system will search for the address in the
mapping disc’s database. When the address is found, it
will be shown on your navigation system’s screen along
with the buttons described below.
• Select Go, the navigation system calculates
route(s). Select a route (i.e. Shortest Route), and
Start Guidance.
• Select Map, the navigation system displays the
Destination Map Screen.
• Select Call, the navigation system initiates a call
to your destination with your Bluetooth phone
(if available) or OnStar Hands-Free Calling
(if minutes are available).
• Select Add to Address Book, the navigation system
copies the downloaded destination to the address
book and displays the new address book entry.
• Select Back, the navigation system cancels your
OnStar Destination Download and returns to the
previous screen. The downloaded address will not
be added to the previous destinations
Route Guidance Not Active
If an OnStar destination is downloaded while route
guidance is not active, the navigation system displays
an OnStar Destination Download Screen and operations
will continue as outlined in the Using OnStar Destination
Download section:
Route Guidance Active
If OnStar downloads a destination while route guidance
is already active, the navigation system adds the
downloaded destination as the next waypoint in the
existing route. All features such as Call and Add
to Address Book will be available for the waypoint.
Refer to the section on Waypoints for more information.
OnStar Download Screen
2-19
To Next Page
Loading...
