72 Navigation
Route Guidance
.
Touch GO to go to the main
navigation view and to start
route guidance.
.
If the system has an active
route, a pop-up will display,
“What would you like to do with
this destination?” The options
are: Add As Waypoint, Set New
Destination, or Cancel.
.
If a waypoint is added, it is
placed in the location that leads
to the most efficient route.
.
There is a maximum number of
waypoints that can be added to
the system. When the maximum
number of waypoints has been
reached, a pop-up displays
indicating that a waypoint must
first be deleted before a new one
can be added. The system will
hold this waypoint into a
Pending Waypoints list and will
automatically be added to the
route once a position is
available, either by arriving at a
waypoint, or by deleting one.
.
To save a location, tap on the
Q
to display the Favorite buttons.
Touch and hold on a favorite
location to save the shown
location as a Favorite.
Estimated Time of Arrival (ETA)
and Distance
.
When under route guidance, the
system shows the ETA or travel
time, or the driving distance.
.
The ETA and travel time are
calculated using any available
traffic information.
.
If in a waypoint trip, the ETA,
travel time, and driving distance
are all shown relative to the final
destination.
.
The final ETA is shown taking
into consideration any time zone
crossings that the route has
traveled through.
.
Touch the ETA information area
to switch between the estimated
arrival time, total driving time
resulting, and driving distance.
Current Street Name
The current street name that the
vehicle is driving on is displayed
along the bottom center of the
display.
When driving off-road or on an
unknown road, “Off Road Location”
displays.
City Lane Guidance
To Next Page
Loading...
