129 . . .
–
Section 1
To Go Back to Your Set Speed
If you have temporarily turned
off cruise control without erasing
the set speed memory, do the
following to re-engage cruise
control:
• Once you're going about
40 km/h or more, press the
plus (+) button for a moment.
You'll go right back up to your
chosen speed and stay there.
When you push the plus (+)
button to return to your chosen
speed, don't hold the switch
there. If you hold it, the vehicle
will accelerate and continue to
gain speed. It will keep going
faster until you release the switch
or apply the brake.
To Go to a Higher Speed
To go to a higher speed, do any of
the following:
• Use the accelerator pedal to
get to the higher speed.
Press SET.
Release the button and the
accelerator pedal. You'll now
cruise at the higher speed.
RES
SET
RES
SET
$10araEscaladeEXT Page 129 Wednesday, October 14, 2009 9:54 AM
To Next Page