61 . . .
–
Section 1
- ON (on)
When the vehicle is unlocked
using the Remote Keyless
Entry transmitter, the
exterior lights will also turn
on. They will stay on for
20 seconds or until the
ignition is turned on or
the lock button on the trans-
mitter is pressed.
This is the default setting.
- NO CHANGE (no change)
Once the desired setting is
displayed, press the button
to select it.
You may now either exit pro-
gramming mode or program
the next available feature.
To exit programming mode,
see "Exiting Programming
Mode" later in this section.
See "Remote Keyless Entry" in
Section 3 for more information.
• AUTO HIGH BEAMS (auto-
matic high beams)
This feature allows you to
turn the automatic high beam
system on or off.
Press the button to enter the
submenu.
While in this submenu, press
the button repeatedly to
scroll through the following
options:
- OFF (off)
Select this option to disable
this feature.
This is the default setting.
- ON (on)
Select this option to enable
this feature.
- NO CHANGE (no change)
Once the desired setting is
displayed, press the button
to select it.
You may now either exit pro-
gramming mode or program
the next available feature.
• CHIME VOLUME (chime
volume)
This feature allows you to
change the chime volume
level. The chime cannot be
turned off completely.
The system has two chime
volume levels, normal and
loud.
$10araEscaladeEXT Page 61 Wednesday, October 14, 2009 9:54 AM
To Next Page
Loading...
