CAL Controls CAL 3300 - User Manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

CAL Controls CAL 3300 Specifications

General

Type	Temperature Controller
Supply Voltage	100 to 240 VAC
Mounting Type	Panel Mount
Input Type	Thermocouple, RTD
Number of Outputs	2
Operating Temperature	0 to 50 °C
Output	Relay
Control Mode	On/Off, PID
Display Type	Dual 4-Digit LED
Switching Current	5A

Summary

Instrument Panel Features

Adjustments

Controls for adjusting setpoints and parameters of the instrument.

Functions Menu

User-Protected Settings

Security settings to protect user access to device functions.

Manual Adjustments

Parameters for manual control and adjustments of the device.

Program Entry

Section detailing how to enter and configure program settings.

Getting Started

Initial Set-up

Step-by-step guide for the initial configuration of the controller.

Autotune

Procedure for automatically tuning the controller to the process.

Proportional Cycle-Time

Cycle-Time Recommendations

Guidance on recommended cycle times for different output devices.

Programmer

Ramp-Soak

Feature for controlling temperature ramps and soak periods.

Second Setpoint (SP2)

SP2 Operation Modes and Alarms

Configuration of SP2 operating modes, alarms, and output states.

Error Messages

Troubleshooting guide for error messages displayed by the unit.

Function List (Levels 1 to 4)

SP1 and SP2 Operating Parameters

Parameters for controlling SP1 and SP2 operation.

Programmer Settings

Settings related to programmer functions like ramp rate and soak time.

Manual Control Modes

Modes for manual control of the unit's outputs.

Input Selection and Ranging

Sensor Selection

Guide for selecting the appropriate sensor type for the input.

Output Configuration

Details on configuring the output devices for the controller.

Mechanical Installation

DIN Panel Cutout

Specifications for panel cutouts required for unit mounting.

Mounting Instructions

Step-by-step guide on how to mount the controller.

Cleaning

Instructions for cleaning the controller unit.

Electrical Installation

Output Devices

Description of available output devices like solid state relays and miniature relays.

Wiring the Connector

Guidelines for correctly wiring the controller's connectors.

Inductive Loads

Recommendations for handling inductive loads to prolong relay life.

Sensor Selection

Thermocouples

Details on different thermocouple types and their specifications.

Resistance Thermometer

Information on resistance thermometer inputs like Pt100.

Specification Overview

General technical specifications including calibration, environment, and weight.

Safety and Warranty Information

Installation Safety

Important safety considerations for installing the equipment.

Configuration Safety

Ensuring safe configuration and protection against tampering.

Ultimate Safety Alarms

Warning against using SP2 as the sole alarm for critical functions.