P
OCKET REFERENCE GUIDE — 9
Ç √ x
2
— Squares the value in
the display.
√ Square Root Key — Used
to find the Square Root of a
non-dimensional or area
value.
Ç • Total Cost — Based on
entry of per unit cost.
Ç 0 Store Weight per Volume
— Stores a new Weight per
Volume value as listed
below:
Note: After entering a value
and pressing Ç 0, continue
pressing the 0 digit key until
you’ve reached the desired
Weight per Volume format. To
recall your setting, press ® 0.
• Ton Por YD CUB
• LB Por YD CUB
• LB Por PIES CUB
• MET Ton Por M CUB
• kG Por M CUB
This value is stored until
you change it or perform a
Clear All (Ç x).
Ç 5 On-Center Spacing (o.c.)
— Stores a new on-center
spacing (e.g., 2 4 i
Ç5). The value is used
for jack and rake wall stud
calculations. Default is 16”.
To Next Page
Loading...
Need help?
General
