P
OCKET REFERENCE GUIDE — 32
(Cont’d)
KEYSTROKE DISPLAY
2. Find the Hip/Valley rafter and Jack
rafter lengths:
H LIMA 9 PIES 7-1/4 PULG
j CCEC 16 PULG*
j CC 1 5 PIES 10 PULG
j CC 2 4 PIES 2 PULG
j CC 3 2 PIES 6 PULG
j CC 4 0 PIES 10 PULG
j CC 5 0 PIES 0 PULG
*Uses standard (default) 16-Inch On-Center. To
enter a new On-Center (e.g., 18 Inches) press
1 8 i Ç 5. Press ® 5 to review stored
value. This value will remain stored until you re-
enter a new value or perform a Clear All (Ç
x).
GUARD
To Next Page
Loading...
