User’s Guide — 15
If you are entering points in time, you
do not have to use the : key. Under
this method you would enter the time
as it is read, then press A or p.
Keystroke Display
Enter 8:05 am in Decimal mode:
805A 8:05:00 AM
Auto Entry H:M:S Mode
In this mode, the calculator assumes
the value is being entered in an Hour:
Minute:Second (H:M:S) format. The
calculator will scroll the numbers
entered from right to left. Entered
H:M:S formatted values are limited to
less than 100 hours. However, the cal-
culator will display results greater than
100 hours in H:M:S format.
Keystroke Display
Set to H:M:S mode and add the following values:
M*
AUTO
0:00:00 HR MIN SEC
120345+ 12:03:45 HR MIN SEC
110410 11:04:10 HR MIN SEC
+14::40 14:00:40 HR MIN SEC
+652212 65:22:12 HR MIN SEC
= 102:30:47 HR MIN SEC
Return to Decimal mode (default):
MM* DEC 0.
* Repeatedly press M, if needed,
until desired mode is displayed.
To Next Page
Loading...
Need help?
General
